Description
of the Features and Specifications:
The
RA Series combines a surface mounted Wall Panel with a separate
enclosure that houses the primary Controller components. Minimum
wall demolition is required with virtually no wall repairs needed.
A wall box is inserted into the wall cavity to provide a mounting
point and connection area for the control wiring from the wall
panel switches terminating at the PCB of the Controller.
The
system is provided with a fifty (50') spool of plenum rated 24
gauge shielded cable. This control cable can be either installed
surface mounted to the wall with a field provided wire mold or
within the wall cavity. Once control cabling is installed, the
wall panel mounts onto the wall box, using two set-screws to secure
it in place.
It
is recommended that the Controller be mounted directly overhead
in the ceiling space (especially important if the LS Series Option
is included); or remotely mounted on a wall surface in either
a storage closet or science prep-room. Control wiring to the solenoids
and electrical contacts are installed similarly to that of the
standard unit.
A
Multi-Pack system is available that incorporates up to four Wall
Panels in four individual classrooms. Each Panel terminates at
a single remotely located Multi-Packages controller that houses
four individual PC Boards that each functions independently from
the others. A single source "ems" signal will enable
all four Controllers. Alarm outputs from each can be directed
either individually to a Remote Monitoring Panel or combined into
a single output signal.
The
Multi-Pack systems are engineered to meet the specific needs of
an individual application on demand and can be packaged with multiple-grouped
E-Series Enclosures and individual solenoids as well as necessary
hook-up wiring cabling. Design and installation coordination service
is included in Multi-Pack systems.
