|
Pre-Assembled
Solenoid Enclosures
The S Series
Enclosures are pre-assembled enclosures intended for use with the
ISIMET Utility Controller.
Each solenoid "station" is assembled with a threaded main
ball valve cut-off and union fittings. All piping joints are tested
for tightness. However, the union at each station is loose fit for
ease in field installation. The stations are secured to aluminum
strut supports by means of pipe clamps. Both inlet and outlet of
the stations are plugged to prevent foreign matter from entering
the system prior to installation. |
Refer to Installation and Wiring Instructions for details regarding
field connections of the assembly components.
Enclosure
Dimensions:
Enclosure dimensions vary from a 14 X 16 size for smaller valve
assemblies to a 24 X 24 enclosure for dual valve assembles. Three
or more valve assemblies can be custom designed to meet specific
project requirements.
Solenoid Valve Specifications:
The General
Service Solenoid Valves are NPT from ½" thru 1 ½"
in size and are of Brass Construction.
Fuel Gas Specific Aluminum Solenoids are used for all Fuel Gases.
Operating Mode:
Normally Closed - Closed when de-energized.
Normally Open Solenoids are used in some custom applications.
|
