The Remote Monitoring
Station permits remote integration of the various ISIMET monitoring
devices.
Stations can operate as Stand-alone with components from other
sources.
The Station features two (2) time delay “ON” circuits that are
independently field settable from 0 to 5 minutes. The unit can be used to prevent incidental or unintentional
alarm notification due to inadvertent activation of an emergency
shower, or as an output monitoring companion device to the
ISIMET
Utility Controller. The
RMS-5 Unit is provided with a normally open float switch to detect
high level of fluid. The normally closed switch with the RMS-6 unit detects low
levels. These two units
are suited for alarm notification for pump discharge applications to notify when a failure of operation due to increase or
decrease in fluid level is detected. Cord length is 30 ft. with a 3 ½ - 24” tether length.
The time delay feature allows for separate delay settings of two
independent output circuits.
One circuit is provided with a 24-vac output to operate a beacon or
sounder as well as a set of dry contacts. These contacts are intended to be used for integrated
notification to an independent monitoring system such a fire alarm
system. The second
circuit provides 24-vac output for a second audible or visual
notification device.
Several ADD-ON components are available with the unit as are added
features such as Hx.
This feature permits one of the outputs to be turned OFF during
operation. It is
ideally suited for Horns or Audible Sounders that serve a purpose
during notification but may become annoying or distracting during
response. The shut-down
cycle is per activation, thereby permitting the Horn to sound upon
each activation of the unit.
Models:
Options Include: (Suffix)
H –
Horn / Siren
B –
Red Flasher Beacon
(Beacon may be ordered without j-box and SS panel – suffix Bx )
Hx
– Horn shutdown cycle permits horn to be turned OFF during
operation. Also serves as a STOP button when activated by the “P” option Panic
Button.
F –
Stainless Steel Panel (Flush Mount Installations)
P –
Panic Button W/ by-pass circuit to operate alarm W/O flow present.
(By-passes circuit 1 time delay.)
K –
Key Switch permits system shut-down without remove of the panel.
S –
Strobe Light - Red(10
Joule) (Strobe may be ordered without j-box and SS panel – suffix Sx)
A – Audible Sounder (90 dB)
Units are provided with all mounting hardware and other components
common with the accessory component.
