The ISIMET Time Control
Unit provides the time sequencing feature common to systems that are integrated with a building automation or management system “ems”.
Similar to those systems this unit includes a 7-day time switch that
can be set to specific timing “ON” and “OFF” periods of operation.
Other Features include:
Operation Switch: Panel Mounted Switch permits system to
be turned OFF for maintenance purposes. Panel mounted lamp
indicates that system is operational.
Over-ride Switch:
A panel mounted momentary key-switch interrupts the timing “OFF”
sequence for a settable period from 30 – 60 minutes (5% tol.).
The “ems” Circuit is provided with an Indicator.
Alarm-IN Hub: A
common input point for integration with a building alarm system
that permits input integration from that system for a series of ISIMET
Control Systems to occur at a
single point. N/O-N/C Contacts. Circuit is provided with an
Indicator.
PANIC Button:
Remote Panic Assembly when connected to the “Isolated Panic Input”
will place All Controllers connected to this unit into “Panic”.
Requires reset at the Time Control
Unit before operation is restored at individual ISIMET
Controllers. Circuit is provided with an Indicator.
Interface HUB: A
Terminal strip is provided within the enclosure to facilitate
field provided wiring terminals between the ISIMET Control Systems and integrated automation systems.
“ems” HUB (optional feature):
Omitting the Timer and providing an input hub for an “ems” signal permits a single “ems” signal to be distributed to each of
a group of Controllers.
