South Carolina Safety Standards Compliance

                Menu
Home
Up
Arkansas
California
Florida
Idaho
Illinois
Kentucky
Massachusetts
Miami-Dade County
Minnesota
New Jersey
North Carolina
Ohio
Oklahoma
Oregon
South Carolina
Texas
Washington
NFPA
NSTA
CSSS

 

 

In review of the South Carolina Planning and Construction Guide - Division 3; Design Criteria; Section 303.7.2.2 Specific Requirements It is our opinion that the ISIMET Utility Controller complies fully with standards established for master cutoff, and that the reference to "without the use of keys" is intended to apply to the shutoff rather than turn ON capabilities of such a master cutoff.

Excerpts from the South Carolina Planning and Construction Guide

Paragraph 16. "Master water, electrical and gas cutoff shall be located in the instructor's demonstration desk or close proximity. These shall be readily accessible to the instructor without the use of keys, special tools, etc."

Design Criteria for Science Facilities

Master water, electrical, and gas cut-off shall be located in the instructor’s demonstration desk or close proximity. These shall be readily accessible to the instructor without the use of keys, special tools, etc., and shall be clearly labeled.

Sales Representative

Haas Sales
7804 Fairview Rd. Box 222
Charlotte, NC 28226-4998
(Cell) 704-562-7239
(Office) 704-554-1840
(Fax) 704-554-1841
Hans@HaasSales.com


ISIMET Utility Controller Safety System

 

Home ] Up ]

Isimet - 103 C.J. Wise Parkway - P.O. Box 129 - Naples, TX 75568 - (903) 897-0737 - Fax (903) 897-0740
All content, unless otherwise specified, is © Copyright 2005 Isimet, LLC